Chinese translation for "spindle motor"
|
- 主轴电动机
主轴马达
Related Translations:
- Example Sentences:
| 1. | General specification for d . c . spindle motors
数控机床直流主轴电动机.通用技术条件 | | 2. | General specification for a . c . spindle motors
数控机床交流主轴电动机.通用技术条件 | | 3. | Nevertheless , “ spindle motors will probably always be there ” to turn mini - disk drives , even denser ones that store video files , says bi chao , research scientist at the data storage institute in singapore
但正如新加坡资料储存研究院的赵毕（音译）所说，为转动小型磁碟驱动器，主轴马达可能永远都不会消失，即使是在资料储存密度更高的影音磁碟亦然。 | | 4. | The results show that , when increasing the feed rate of the grinding wheel , decreasing the rotating speed of the wafer chuck table and using coarser grit grinding wheel , the material removal rate in the wafer rotating grinding increase , the feed rate of the grinding wheel has greater influence on the material removal rate ; when suitably increasing the rotating speed of the grinding wheel , decreasing the feed rate of the grinding wheel and using finer grit grinding wheel , the wafer surface roughness can be reduced ; there exists a critical rotating speed of the grinding wheel ( about 2300rpm ) , beyond which the material removal rate evidently decreases and the spindle motor current and wafer surface roughness steeply increase ; when the grit size of the grinding wheel is finer than # 2000 , the material removal rate decreases and the wafer surface roughness has no obvious improvement
研究结果表明，增大砂轮轴向进给速度和减小工件转速，采用粗粒度砂轮有利于提高磨削矽片的材料去除率，砂轮轴向进给速度对材料去除率的影响最为显著；适当增大砂轮转速，减小砂轮轴向进给速度，采用细粒度砂轮可以减小磨削表面粗糙度；在其它条件一定的情况下，砂轮速度超过一定值会导致材料去除率减小，主轴电机电流急剧增大，表面粗糙度变差；采用比# 2000粒度更细的砂轮磨削时，材料去除率减小，矽片表面粗糙度没有明显改善。 | | 5. | By using a wafer - rotating grinding machine , the influence of the main process factors including grit size of diamond grinding wheel , rotating speed of the wafer chuck table , rotating speed and the down feed rate of the cup grinding wheel on the material removal rate , spindle motor current and wafer surface roughness in grinding large size wafer are experimentally investigated
摘要利用基于自旋转磨削原理的矽片超精密磨床，通过试验研究了砂轮粒度、砂轮转速、工件转速及砂轮进给速度等主要因素对材料去除率、砂轮主轴电机电流以及磨削后矽片表面粗糙度的影响关系。 |
- Similar Words：
- "spindle matrix" Chinese translation, "spindle microtubule" Chinese translation, "spindle moistener" Chinese translation, "spindle moisture applicator" Chinese translation, "spindle moment" Chinese translation, "spindle moulder" Chinese translation, "spindle mower" Chinese translation, "spindle nephoscope" Chinese translation, "spindle nose" Chinese translation, "spindle nut" Chinese translation
|
|
|
